News

GGG50 Ductile iron Material with gearbox and with pneumatic actuator. Akzo Nobel Coating Application of the Double Eccentric Butterfly valves Double Eccentric Butterfly Valves, mainly used for water drainage in water plants, power plants, steel plants, smeltin...

SS316L High pressure Trunnion mounted ball valve with anti-static Design 3-Way ball valve with 10inches 300LBS flanged ends Ball valves applications The following are some typical applications of Ball valves: -Air, gaseous, and liquid applications -Drains and ...

LCC material and SS304 disc Check valves dated July. 14, 2019 cryogenic valve The definition of low temperature valves in the petrochemical industry is based on the design temperature of the?conveying medium. Generally, the valves applied to the medium temper...

Customerized Disc check valves with counter weight dated Aug. 15, 2019 During the use of this valve, the medium flows in the direction of the arrow shown on the body. When the medium flows in the prescribed direction, the valve disc is opened by the force of t...

Typical applications of Butterfly valves A Butterfly valve can be used in many different fluid services and they perform well in slurry applications. The following are some typical applications of Butterfly valves: -Cooling water, air, gases, fire protection e...

Working principle of pneumatic control valve Pneumatic control valve is a pressure balance type for temperature ratio, pressure ratio and flow ratio. It adopts single seat and sleeve type structure. Equipped with multi-spring pneumatic membrane actuator,?the ...

A check valve prevents potentially damaging backflows to protect equipment like pumps and compressors. Non-return valves allow the flow of the fluid in one direction only and block reverse flows. This type of valves is available with cast and forged bodies (BS...

Learn about the different types of valves used in the oil and gas industry and their differences: API and ASME gate, globe, check, ball, and butterfly designs (manual or actuated, with forged and cast bodies). Briefly said, valves are mechanical devices used i...

What is a gate valve? It is a shut-off device to open and close the flow of the fluid conveyed by a piping system (or a pipeline). A gate valve is a bi-directional valve, as the fluid may flow in either direction. The installation of this type of valve creates...

In short, a butterfly valve is a quarter turn rotational motion valve. Just like any other valve, they are used to either start, stop, and regulate flow. This type of valve has been around since the early 1930s and has a wide range of applications in industria...